Expert Tips and Tricks for Installing a New Shower Unit

Expert Tips and Tricks for Installing a New Shower Unit

Blog Article

Call Today

Were you interested in help and advice around How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installation needs careful planning as well as a great deal of work. In many cases, you will certainly require to do 3 kinds of jobs: mounting wall surfaces, installing the plumbing, and also ending up walls.

Preparation

Firstly, you must select the kind of shower that you desire to install. It is important to identify whether the chosen shower is capable of managing certain systems and also can control a risk-free level of water via the central heating boiler. The majority of shower units nowadays are designed to be adaptable to different water pressures (such as saved warm water as well as chilly keys).
It is also essential to take into account the water stress and also the preparation of the piping and also drain for the shower

Different Sorts Of Shower Units

Push-on Mixer: The tube as well as spray parts of the push-on mixer shower system can be connected to the bathroom faucet as per your need, and also the water temperature level can be readjusted through the taps. Push-on mixers are cheap as well as extremely simple to set up. However, although the tube connection is basic, it is easily removed. In addition, it is troublesome to change the temperature.

Bath/Shower Mixer: The hose pipe and spray of this sort of shower are combined with a bathroom mixer tap, and also the temperature can be adjusted through the bathroom taps. It is a very low-cost choice and also no extra plumbing is involved. However, the bath/shower mixers also experience inconvenient temperature control options.

Handbook Mixer: The tube and also spray of a hand-operated mixer shower device belong of the wall surface unit and also the cold and hot water supplies are connected to a solitary valve The temperature as well as stress of the water are controlled through either one or a range of knobs (in a lot more expensive showers). Although temperature level control is much easier in hands-on mixer kinds, they are much more pricey than the formerly mentioned mixers. They additionally call for added plumbing of hot and cold supply of water pipelines.

Thermostatic Mixer: The hose and spray of this shower kind are a part of the wall device and the cold and hot water materials are connected to a single valve here as well. It is full with an integrated stabiliser to self-adjust the water temperature level as well as to avoid it from ending up being also warm. Among the greatest advantages of a thermostatic mixer shower type consists of practical temperature control. Nevertheless, it is the most pricey of the various mixer alternatives.

Power Shower: A power shower is a solitary unit consisting of an effective electric pump that is capable of changing both the water pressure and also temperature level. This kind of shower can be fitted if there is water supply from a cold water cistern as well as a warm water cylinder. A power shower makes the modification of both stress and temperature level simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a combination central heating boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply as well as it heats the water electrically. It is necessary to keep in mind that for this shower kind to be set up, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system permits the temperature as well as pressure to be readjusted via a handle. Designs with temperature stabilisers are better as they continue to be unaffected by various other faucets elsewhere in use within the home. A major drawback of electrical showers is that the control knob only permits the choice of high temperatures at less stress, or reduced temperatures at a better pressure. This is bothersome in the winter when the spray is commonly weak and also the keys water is cooler. Nonetheless, this trouble is taken on in some versions which are readily available with a winter/summer setup.

Approach

Relying on the kind of shower you want to set up, the shower head should either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Prior to starting, it is recommended to mark the settings of the shower head as well as control, and also to intend the pipe-work entailed. In addition, the drain system to remove the drainage will certainly need to be intended. Both settings of the cable television course as well as the shower button will likewise need to be taken into consideration if an instant or electrical shower system is being mounted.
Use the direction overview provided with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to cut off the water supply. In order to shield the pipes, they should be given a waterproof covering as well as likewise fitted with separating valves. The pipes can then be buried right into the wall surface and also glued over to neaten the total appearance.
Fit the base tray, shower head, as well as installations.
Connect the main shower control to the pipelines that will certainly be providing the water (This might call for a female screw thread adapter).
Reconnect the water and examination the pipelines for any type of leaks, as some may need tightening.
If you are mounting an electric shower, keep in mind to switch off the electrical power supply prior to making any type of electric links. As soon as these connections have been made (there need to be guidance within the user's manual), the power supply can be switched back on.

Changing Water Stress to Fit Your Shower

The cold water tank can be lifted to a better height (often just 150mm (6inches)) by installation a solid wooden support under it - potentially composed of struts and blockboards. If you select this choice, the main and circulation pipelines will likewise need to be increased to satisfy the new elevation of the storage tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it should be attached into the power supply in order to run.

Piping and Drain

It is best to utilize 15mm size supply pipes, as well as make the go to the shower as short as well as straight as feasible so regarding keep maximum pressure and minimise warmth loss. Additionally, by minimising the use of arm joints for pipeline corners, you can decrease the resistance in the circulation of the water. You can achieve this by bending the pipelines instead.

Many Common Blunders

Breaking or overlooking regional code constraints.

Using pipelines that are too small.

Connecting copper to galvanized without making use of a brass or dielectric fitting between the two.

Not making use of tape or pipeline substance at threaded joints.

Not leveling your fixtures when mounting them.

Not mounting an air void filling for fixtures.

Cutting supply stub outs too short to install the shutoff valves onto after the finished wall is in location.

Not correctly lining up tubing into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will cause a leak.).

When transforming the water back on in your house, always run the outdoors tube valve or flush your bathrooms to bleed dust and air from the lines. This debris can create issues in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We are very involved in How to Build a Shower Enclosure for Your DIY Bathroom and I am assuming you enjoyed reading the blog post. If you enjoyed our page if you please be sure to pass it around. Thanks for your time spent reading it.

Contact Us Today

Report this page